Yes, within the press’s rated capacity. Hydraulic sectional forming is a practical method for large-diameter and thick-plate flights, especially when continuous cold rolling cannot handle the thickness, material strength or diameter. Industrial hydraulic presses can form segments up to 3000 mm diameter and 60 mm plate, but many standard sectional machines are rated much lower—around 800 mm OD and 12 mm thickness. The answer depends on matching the machine’s tonnage, die size and frame stiffness to the specific flight geometry and material.
Sectional forming uses a hydraulic press to bend one plate segment at a time against a die. The process applies high force locally, so it can handle thick carbon steel, stainless steel and wear-resistant plate that would overload a continuous cold-rolling line. Because each segment is formed individually, diameter, pitch and thickness can be adjusted with lower tooling investment than dedicated continuous rolls. A Spiral Blade Forming Machine in sectional configuration is therefore common for heavy-duty and custom flight work.
Do not rely on a single maximum thickness figure. Confirm capacity at the actual OD, ID, pitch and material grade:
Hydraulic tonnage and frame rigidity. Thicker, stronger plate requires more force and a frame that does not deflect under load.
Die size. The die must accommodate the segment chord length and radius for the target diameter.
Springback and material ductility. Wear-resistant and high-strength grades need more over-bend and may require process adjustments.
A sample test should use the most demanding combination—which may be a thick, high-strength, tight-pitch segment rather than the largest diameter. For a direct method comparison, see Sectional Screw Flight Forming Machine vs. Continuous Flight Forming Machine. A Continuous Screw Flight Cold Rolling Machine remains more efficient for thin strip and high-volume continuous production.
It is the better fit when plate thickness exceeds cold-rolling limits (often 8–12 mm for carbon steel, lower for stainless), the material is wear-resistant or high-strength, the diameter is large, volume is low-to-medium, or segments are needed for field assembly. Before requesting quotations, review What Specifications Should I Check Before Buying a Screw Flight Forming Machine? to ensure the supplier’s tonnage and die data cover your thick-plate range.
OD, ID, pitch, direction, plate thickness, material grade (Q235/Q345/304/316L/NM400/Hardox), segment or continuous, tolerance, surface requirement, annual quantity and maximum segment weight. Without these, a “suitable” answer is only a guess.
Contact: Lucy Chai | Lucy.chai@huataogroup.com | www.refinerdisc.com | WhatsApp: +86 15373883537
Tags: #ScrewFlight #SpiralBlade #MetalForming #HUATAO #auger #screwconveyor #feedmixer #TMRMIXER #Sandwasher
can not be empty
can not be empty