Huatao Technical News

Sectional Screw Flights vs. Continuous Screw Flights: Which Should You Choose?

Date Issued:2026-11-17

A screw flight manufacturer needs to match the product structure with the forming process. Sectional and continuous screw flights are both used in screw conveyor and auger production, but the two constructions have different manufacturing steps and equipment requirements. Selecting the right route begins with the drawing and the application.

Sectional Flighting: Plate-Based Segments

Sectional flighting is produced from individual plate blanks. The blank is formed into a helical segment, and multiple segments are joined to create the required flight length. The segments are then attached to the shaft or tube. This approach is often evaluated for custom dimensions, thicker plate, special profiles and replacement work where individual sections are useful.

The main production considerations are blank cutting, forming tooling, segment alignment, joining, welding distortion and inspection. A manufacturer should confirm that the hydraulic forming machine and die can handle the required material grade, thickness and geometry. For a sectional production route, review the Spiral Blade Forming Machine.

Continuous Flighting: Strip or Coil Formed into a Helix

Continuous flighting is formed as an uninterrupted helix. Cold rolling and mould winding are two distinct processes. Cold rolling uses a forming arrangement to develop the helical shape from strip. Mould winding uses dedicated winding tooling to form the strip. The resulting thickness profile, available geometry and tooling requirements depend on the specific process.

Continuous flighting may suit repeatable product families and longer flight lengths when the required dimensions fit the equipment range. It reduces segment-to-segment joints in the flight body, but the finished flight still needs to be attached to a shaft or tube and inspected. For cold-rolled production, compare the Continuous Screw Flight Cold Rolling Machine. For mould winding, review the Winding Spiral Blade Forming Machine.

How to Match the Flight to the Application

Consider the conveyed material and operating conditions. Abrasive solids may require a greater wear allowance or a material selected for abrasion resistance. Corrosive or wet materials may require a different grade or surface finish. Impact, temperature, cleaning and operating speed also matter. Sectional construction can accommodate heavier plate, but thickness alone does not determine service life.

Then review geometry: outside diameter, inside diameter, pitch, thickness, thickness profile, flight height, handedness and length. For replacement parts, add the shaft/tube dimensions and installation access. A product that matches OD but not pitch or ID may not fit or operate correctly.

How to Compare Manufacturing Cost

For sectional work, calculate blank material, cutting, scrap, forming, joining, welding, handling and inspection. For continuous work, include strip utilization, coil handling, machine setup, tooling, forming, cut-to-length, shaft attachment and inspection. Both routes also require maintenance, spare parts, operator training and quality control.

The workshop’s order mix is important. High-mix custom production may favor flexibility, while stable repeat production may favor a dedicated continuous process. Compare cost per accepted part and realistic labor hours rather than a machine’s advertised maximum speed.

What to Prepare Before Requesting a Quotation

Product drawing and revision number.

OD, ID, pitch, thickness and finished length.

Material grade and operating wear/corrosion conditions.

Sectional segment or continuous flight requirement.

Handedness, shaft/tube interface and joint details.

Batch quantity, annual volume and expected size changes.

Required tolerances and inspection criteria.

A supplier should review the complete specification and identify any information that remains unconfirmed. Where possible, arrange a trial using a representative workpiece and record the tested material, tooling, machine configuration and measured result. Do not treat one successful sample as proof of every possible size or material.

Conclusion

Sectional flighting is often the route to assess for plate-based custom segments, thicker sections and segment replacement. Continuous flighting is worth assessing for uninterrupted helices and repeatable production within a compatible machine range. Cold rolling and mould winding are separate options. The right choice depends on the part, duty, volume and verified equipment capability.

Contact HUATAO

Email: Lucy.chai@huataogroup.com

Tel / WhatsApp / WeChat: +86 153 7388 3537

WhatsApp: https://wa.me/15373883537

Website: https://www.refinerdisc.com/

Contact page: Contact HUATAO

 

* E-mail :

can not be empty

* Question :

can not be empty

Related News