NEWS

What Machine Do You Need to Form Thick Steel Screw Flights?

Date Issued:2026-11-17

For heavy-duty steel spiral flights that exceed the limits of continuous rolling—typically those with a thickness greater than approximately 6 mm (including those made from Hardox or NM wear-resistant steel)—a single-segment hydraulic spiral flight forming machine is the appropriate solution. This equipment utilizes a die set to form one spiral segment per pressing cycle. Three critical specifications define such a machine: a robust, fully welded base; a tonnage capacity rated for specific material grades and pitch requirements; and dies engineered to control spring-back and edge cracking.

Why choose a single-segment hydraulic press over a continuous rolling machine?
Continuous cold rolling is a strip-processing method that uses a roller assembly to shape material into a helix; it is highly efficient for thin materials and ensures consistent, repeatable output. However, it lacks the localized tonnage required for thick plates. In contrast, hydraulic single-segment forming applies pressure via a die to bend the plate into the desired spiral shape. Because the pressure is concentrated and the die precisely defines the geometry, this process is ideal for thick carbon steel, stainless steel, and wear-resistant alloys. When the thickness, material hardness, or diameter exceeds the capabilities of rolling equipment, hydraulic single-segment forming is the preferred choice.

Base Frame Rigidity: A Prerequisite for Longevity
Forming thick plates generates significant reaction forces that the machine frame must absorb. Bases with hollow or skeletal designs—while lower in cost—are prone to deflection under high-tonnage, cyclic loading. Such deflection leads to misalignment, resulting in issues like inconsistent pitch, bearing failure, and hydraulic leaks. Machines lacking sufficient structural integrity typically develop these problems within one to two years. A robust, reinforced base—constructed from fully welded steel plate with internal multi-column support—resists deflection and maintains precise alignment. This rigidity is the foundation that allows a machine to withstand seven to eight years of heavy-duty operation. Buyers should request photographs of the base taken in the workshop prior to final assembly, as the internal support structure is not visible once the machine is fully constructed. Tonnage and Material: Why Surface-Level Figures Are Not Enough
A press rated for 12 mm mild steel may be incapable of forming 20 mm Q345 or 12 mm Hardox steel plates. High-strength steel plates require greater force and exhibit more pronounced springback. Both the tooling and the press must be capable of handling "overbending" to ensure the material ultimately achieves the correct helical shape. A capacity assessment is only meaningful when the buyer provides the actual outer diameter, inner diameter, pitch, thickness, and material grade.

Tooling: Controlled Wear, Not Rapid Consumption
If the forming process is too abrupt, Hardox and similar wear-resistant steel plates may crack at the edges. The tooling must allow for gradual deformation, and the tool steel must be heat-treated to withstand the associated pressures. In a well-matched system, tooling wear is predictable and does not necessitate frequent replacement. The risk arises when a press frame is undersized or prone to deflection, forcing the tooling to compensate—which accelerates wear. On a properly specified machine, the components that eventually require replacement are inexpensive and easy to swap out. Because the tooling is not subjected to stress beyond its design limits, operating costs remain low.

Matching the Machine to the Tooling
Processing thick plates pushes a machine toward the limits of its operational capacity; therefore, selecting equipment based solely on a "maximum thickness" rating in a product catalog is unreliable. Machine specifications should be determined by the requirements of the workpiece: outer diameter, inner diameter, pitch, material grade, and production volume. These factors dictate the necessary tonnage, tooling dimensions, and frame configuration. Huatao’s single-segment helical flight forming machine is designed precisely according to this matching principle.

Producing helical flights from thick steel plate requires a dedicated hydraulic press featuring a robust base, tonnage tailored to the specific material, and tooling engineered for the deformation characteristics of thick plate. Buyers should verify frame rigidity, material-specific tonnage, and pre-shipment test results to avoid a common pitfall: a machine that appears adequate on paper but fails to meet the actual demands of thick-plate production. For the mass production of thin strip material, continuous cold-rolling mills for helical flights remain a suitable choice.

Contact
Lucy Chai 
Email:Lucy.chai@huataogroup.com 
WhatsApp: +86 15373883537
www.refinerdisc.com

* E-mail :

can not be empty

* Question :

can not be empty

Related News