For horizontal TMR mixer manufacturers, screw flights are important components of the mixing assembly. Their dimensions, material and finished geometry must match the mixer design.
When producing replacement flights or new auger components, the manufacturing method should be selected according to the original flight construction.
For individual spiral sections, a single-piece hydraulic screw flight forming machine can be considered. It presses separate steel sections into spiral blades using a suitable forming mould.
First, identify whether the TMR mixer uses sectional flights or continuous spiral flighting.
The key dimensions include inner diameter, outer diameter, thickness and pitch. Shaft connection details and any special profiles should also be checked.
These factors determine which forming process is appropriate.
The correct material depends on the mixer design and operating conditions.
The machine brochure lists carbon steel, 304 stainless steel, 201 stainless steel and HARDOX steel as processable materials.
For TMR mixer applications, the exact grade should be confirmed against the original component specification and expected wear conditions. A material listed as processable by the machine is not automatically the best material for every mixer.
Hydraulic pressing: Forms individual flight sections using a press and mould. This method can be evaluated for sectional mixer flights.
Continuous cold rolling: Produces continuous screw flighting through a rolling process. It is intended for a different flight manufacturing route.
Winding: Forms spiral blades by winding strip material. It is also a separate forming process.
If your mixer uses individual flight sections, evaluate a Spiral Blade Forming Machine. If your product design requires continuous flighting, compare it with a Continuous Screw Flight Cold Rolling Machine. For winding production, see the Winding Spiral Blade Forming Machine.
The machine must match the complete flight specification.
The brochure lists the HT240, HT280 and HT330 models for different thickness, pitch and diameter ranges. The HT330, for example, is listed for plate thickness of 2–50 mm and outer diameter below 2400 mm.
These are catalogue limits for the model. The actual achievable combination must be confirmed according to the material, thickness, diameter and pitch.
You do not need to prepare a complete drawing for the initial machine assessment.
Provide:
ID: Inner diameter
OD: Outer diameter
Thickness: Plate thickness
Material: Steel grade
Pitch: Spiral spacing
With these five details, we can evaluate the suitable machine model and discuss customization according to the required flight size and material.
A drawing or sample can be used for final technical confirmation if the flight has special geometry or connection details.
The machine is supplied with a one-year warranty. Under suitable operating and maintenance conditions, its expected service life can reach approximately 7–8 years.
It has very few wearing parts, and replacement parts are inexpensive and easy to change. This helps simplify routine maintenance.
Actual service life depends on operating conditions, usage intensity and maintenance.
What is the best forming method for horizontal TMR mixer flights?
It depends on the flight construction. Hydraulic pressing is worth evaluating for individual sections. Continuous rolling and winding are different options for other flight designs.
Can the machine process HARDOX?
HARDOX is listed in the brochure as a processable material. The exact grade, thickness and flight dimensions need to be confirmed.
Do I need a technical drawing?
No. Five basic specifications are enough for initial model selection.
Can the machine be customized?
Yes. Machine selection and configuration can be discussed according to the required flight dimensions and material.
What warranty is provided?
The machine is supplied with a one-year warranty.
If you manufacture horizontal TMR mixers or replacement auger components, send us the inner diameter, outer diameter, thickness, material and pitch.
We can evaluate whether a single-piece hydraulic screw flight forming machine is suitable for your product and discuss the corresponding model.
Contact
Lucy Chai
Email:Lucy.chai@huataogroup.com
WhatsApp: +86 15373883537
www.refinerdisc.com
can not be empty
can not be empty